• 400g chicken fillet
• 4 cloves garlic
• 15 shallots
• 1 lime
• 4 red chilies
• 8 green chilies
• 1 tablespoon oyster sauce
• 1 tablespoon soy sauce
• 1/2 teaspoon granulated sugar
• 1/2 teaspoon ground pepper
• 1 teaspoon mushroom stock
• 4 kaffir lime leaves

Marinaded chicken for 30 minutes with

• 3 cloves grated garlic
• 1/2 teaspoon grated ginger
• 1 tablespoon roasted coriander
• 2 limes
• 1 teaspoon salt
• 2 teaspoons mushroom stock
• 1 teaspoon ground pepper
• 1 teaspoon brown sugar / white sugar

Frying

• Add 1 egg and 2 tablespoons of cornstarch to the chicken marinade
• Fry the chicken until golden brown, drain
• Double fry the chicken in hot oil for crispy crust

Stir-fry

• Round shallots (do not chop), sauté until wilted
• Add garlic
• Chili peppers
• Lime leaves (finely chopped)
• 1 tablespoon oyster sauce
• 1 tablespoon soy sauce
• 1/2 teaspoon white sugar
• 1/2 teaspoon ground pepper
• 1 measuring spoon of mushroom stock
• Add a little water

Just watch the video until the end you can find great tutorials anytime.

• Cut both sides at a 45-degree angle
• Glue and attach
• Cut the corners crosswise about 2-3 cm from the sides, 2 cm wide and 1 cm deep
• Glue and insert the reinforcing bar

• 2 beaten chicken eggs, fry while stirring until broken up, just briefly, don't let them dry out. Drain.

cut and sauté

• 15 red bird's eye chilies
• 5 curly red chilies
• 8 shallots
• 5 cloves of garlic
• 1 large red tomato

spices (add to the stir-fry)

• 1 measuring spoon shrimp paste

• 1 measuring spoon fine salt

• 1 measuring spoon white sugar

• 1 measuring spoon MSG/flavoring

• Lastly, add the eggs and the stink beans.

• sauté until wilted.

• ready to serve.

• Cut the pieces of wood to be joined to a thickness of approximately 1 cm.
• Drill a hole in the piece to use as a template for the dowel.
• Place the piece on one piece of wood and drill along the template.
• Do the same with the other piece of wood.
• Insert the dowel.
• Connect the two pieces of wood.
• This method is guaranteed to create a precise joint.

• Prepare old cone steer.
• To prevent damage, the old cone steer is covered with a used cone steer before being hit.
• Hit it gently until it is completely inserted, indicated by the sound changing to heavy (tak tak).

• Check all cables to ensure there are no problems, such as breaks.
• The problem is with the CKP sensor, which is weak.
• Replace it with a new one, problem solved.
• The motorcycle returns to normal and is easy to start.

• Remove the double clutch nut using a 39 x 41 wrench.
• Remove the pins on the pulley, there are three of them.
• Remove the bamboo shell by tapping it from the top of the pulley hole using a T-spanner (if you don't have a special tracker).
• Remove the locking stud or clip (check inside the hole).
• Tap again with the T-spanner until the large shell comes loose.
• To reinstall it, use the same sequence as when removing it.

• Use a very sharp and thick knife, not a thin knife
• Start from the bottom of the cut to the top

• make sure the split part is clean of sand or wood chips
• put glue into the gap
• prepare a large nail, cut off the head
• bend it so that it forms a 45 degree elbow
• nail both ends on both sides of the split wood

Indication

• The indicator light is on but there is no display
• Make sure all power supplies are working properly (3.3V, 5V, etc.) - all checked and normal
• Check all important components such as the power IC, graphics IC, etc.
• Check hardware such as the display connector, including cables/flexibles

Fixing

• A corrupted BIOS IC needs to be re-flashed
• This can cause the laptop to shut down during an update, resulting in a corrupted BIOS file.

Ingredients

• 400 grams of chicken thigh fillet, cut into small pieces according to taste
• 10 shallots, thinly sliced
• 10 green chilies, thinly sliced
• Bird's eye chilies (to taste), thinly sliced
• Spring onions

Chicken Seasoning

• 1/2 teaspoon fine salt
• 1/4 teaspoon ground pepper
• 1 teaspoon mushroom stock
• 1/2 teaspoon white sugar
• 1/4 teaspoon MSG (flavor enhancer)
• 2 teaspoons mayonnaise

Cooking

• Season the chicken and grill until cooked through, indicated by the release of oil from the fat
• Add the green chilies and bird's eye chilies
• Add the shallots
• Season with a little mushroom stock
• Cook again until everything is wilted
• Ready to serve

• Prepare a thick iron pipe the size of the bolt head
• Place the pipe over the bolt head
• Weld from the inside of the pipe
• Weld a new bolt to make it easier to open
• Open as usual with an impact wrench

Flat plug

• practical due to its small design
• wiggle when plugged into a wall outlet
• very high potential for sparks
• no grounding

Round plug

• larger size
• very sturdy when plugged into a wall outlet, doesn't wiggle easily
• has a grounding feature to prevent leakage current

This joint very good when used for corner of window or door because looks more aesthetic. Just follow the video for more details.

• Watermelon, cut into 2 x 2 cm cubes, about 10 pieces
• 1 pineapple, peeled
• 1 water apple or Jamaican guava
• Put everything in a blender
• Add full-cream milk
• Lime juice to taste
• Honey to taste
• Blend until smooth, ready to serve

Ingredients

• 400 grams of beef, cut against the grain to taste
• 2 tablespoons cornstarch
• 15 medium shallots
• 3 red chilies
• 3 cloves garlic
• Spring onions to taste
• Shrimp paste powder to taste

Marinade

• 1 tablespoon garlic powder
• 1 tablespoon coriander powder
• 2 tablespoons oyster sauce
• 1 tablespoon mushroom stock
• 1/2 tablespoon pepper powder
• 1/4 tablespoon granulated sugar
• Water to taste

Cooking the meat

• Pour the marinade over the beef, stir well, add a little cornstarch, stir, and fry until cooked through. Drain.

Stir-fry

• Thinly slice the garlic
• Slice the red chilies
• Sauté everything
• Add the shrimp paste powder
• Add the coriander powder
• Add the mushroom stock
• Add the beef and cook until cooked through
• Ready to serve

• HONDA Beat injection
• All parts have been checked including the fuse
• There's no electricity coming from the coil at all
• The fuel pump is working normally
• The MIL code shows no signs of damage to the injection system
• It turns out there's no 12-volt current going to the coil at all - Normally, when the key is turned on, 12 volts flow into the coil.

• Use a used impact screwdriver bit
• Shape the tip to resemble the size of the shock absorber bolt but with a cone shape
• Insert it into the shock absorber bolt and tap it firmly
• Attach the impact screwdriver handle
• Hit while turning

• Don't use out-of-town plates; administrative matters are usually difficult.
• Avoid rough engine noises and repainting marks.
• Check both tires for proper thickness.
• Ensure the oil isn't dry.
• Plug the exhaust pipe to make sure it's dry.
• Check the bodywork is still original.
• Check if it's been dropped. Check the handbrake handle and handlebar ends.
• Check that the front shock absorbers are dry and there are no oil leaks.
• Check the frame above the front wheels for rust or corrosion.
• Low mileage.
• Full throttle to ensure there's no white smoke coming out.

Blender

• 15 cm galangal
• 6 shallots
• 1 stalk lemongrass

In a Bowl, Add

• 500 g chicken
• 1 sachet Desaku marinade
• 1 sachet Desaku garlic powder
• 1 tsp Lalapan pepper powder
• 1/2 tbsp granulated sugar
• The previously blended spices (galangal, lemongrass, and shallots)

Instructions

1. Mix all ingredients evenly.
2. Steam for 10 minutes.
3. Fry until fully cooked.

• Clean and bruise 2 knuckles of ginger
• Add 1 turmeric and 2 stalks of lemongrass to a pot with water
• Boil for 5-10 minutes then pour the warm mixture
• Add 1 tablespoon of lime juice
• Repeat for 3 consecutive days every morning on an empty stomach

• Rear wheel produces a rough grinding noise while driving
• Noise is more noticeable at low speeds and during acceleration
• Vehicle feels weaker than usual when pulling or accelerating
• Feels like there is extra resistance coming from the rear side
• Please inspect the entire rear wheel assembly thoroughly

• Measure and confirm both pipe sizes.
• Select the correct reducer flange or adapter fitting.
• Align the two pipe flanges properly.
• Insert gasket, bolts, and nuts into the flange connection.
• Tighten bolts evenly in a crisscross pattern and check for leaks.

• Attach the spirit level to the drill bit.
• Place the drill in a flat position.
• Glue the spirit level to the back of the drill.